Author Topic: TINIm400 from sensor to DB  (Read 4031 times)

TOMOYO

  • Member
  • ***
  • Posts: 5
TINIm400 from sensor to DB
« on: April 07, 2011, 09:27:18 am »
Hey guys, here we go again for a new thread about TINI !

I'm still workin on my project with TINI, at the moment I did a basic communication between PC ->serial->TINI-> ethernet -> PC.
I did this with a java based application. Now, I have to deal with a labview application generating datas sent by RS232 to TINI, and TINI has to send it over a network to a 192.168.100.3 PC, this PC is using labview to listen to any datas coming to the TCP 4000.

I meet the following issues :
-If I run a read application with labiew, telnet with TINI is lost, and I can't run my tini application.

Why is that ?

Do you have any answer?

Do you need details ?

Jan Axelson

  • Administrator
  • Frequent Contributor
  • *****
  • Posts: 2848
    • Lakeview Research
Re: TINIm400 from sensor to DB
« Reply #1 on: April 07, 2011, 04:31:05 pm »
It's a shame the TINI discussion board apparently has been discontinued. About all I can suggest (again) is searching the archive for clues:

http://osdir.com/ml/hardware.microcontrollers.tini/

or try the Systronix group:

http://systronix.com/

Jan