« previous next »
Pages: [1]

Author Topic: What goes on behind the curtain when Win7 brings up a Ethernet-over-USB network?  (Read 10687 times)

st2000

  • Member
  • ***
  • Posts: 44
What goes on behind the curtain when Win7 brings up a Ethernet-over-USB network?
« on: December 30, 2014, 04:29:56 pm »
Hi,

I would like to test my firmware-hardware which is supposed to look like a Ehternet-over-USB Device.  But it appears that I first need to make Win7 think it is a good network before Win7 will allow anything (i.e. WireShark) to connect to the network which is connected to my firmware-hardware.

Talk about a chicken-egg-chicken problem!

What would help is to know what Win7 is looking for.  How Win7 is bringing up the network.  I thought all I needed was to report that the Ethernet portion of the connection was available and that it had a speed of 10 (i.e. 10Mbps).  But so far when I plug in my firmware-hardware the Win7 box brings up a "Disabled" network that will not support test application connecting to it.  Worse, I think Win7 does not go through the same procedure with each attempt.  Sometimes it takes longer.  And sometimes I have seen descriptions other than "Disabled" appear.  But ultimately the description has always settled on "Disabled".

-thanks


« Last Edit: December 31, 2014, 10:52:45 am by st2000 »
Logged

Jan Axelson

  • Administrator
  • Frequent Contributor
  • *****
  • Posts: 3033
    • Lakeview Research
Re: What goes on behind the curtain when Win7 brings up a Ethernet-over-USB network?
« Reply #1 on: December 31, 2014, 11:16:15 am »
The setupapi.dev.log might have useful information. See:

http://msdn.microsoft.com/en-us/library/windows/hardware/ff550900%28v=vs.85%29.aspx
Logged

st2000

  • Member
  • ***
  • Posts: 44
Re: What goes on behind the curtain when Win7 brings up a Ethernet-over-USB network?
« Reply #2 on: December 31, 2014, 12:09:56 pm »
Quote
The setupapi.dev.log might have useful information. See:

http://msdn.microsoft.com/en-us/library/windows/hardware/ff550900%28v=vs.85%29.aspx
Which sent me to look at my "c:/Windows/inf/setupapi.dev.log" file.  Which is great!  But there's a lot of information in there and after plowing through it I can not say I see a problem.  Admittedly I'm guessing at a number of things.  But was able to find mention of the driver's name and the Windows assigned network name.  As to not seeing a problem, I'm guessing that since the network has been created, the driver and network creation has gone off w/o a hitch.  And that Windows has assigned the description "Disabled" for other reasons after the creation of the USB/CDC based network.

-thanks
Logged

Jan Axelson

  • Administrator
  • Frequent Contributor
  • *****
  • Posts: 3033
    • Lakeview Research
Re: What goes on behind the curtain when Win7 brings up a Ethernet-over-USB network?
« Reply #3 on: December 31, 2014, 12:57:27 pm »
Sounds logical. Something went wrong when the OS tried to use the device.
Logged
Pages: [1]
« previous next »