Author Topic: Embedded host compliance test  (Read 12875 times)

nvd

  • Member
  • ***
  • Posts: 42
Embedded host compliance test
« on: March 20, 2013, 05:20:02 am »
Hi,
 Does USB-IF provide a test verifier for Embedded host similar to USB-CV for peripheral?
 I cant find such Embedded host test suite.

 All we get from USB-IF is USB On-The-Go and Embedded Host Automated Compliance Plan for the On-The-Go & Embedded Host SupplementRevision2.0 Version 1.2
 and Compliance Checklist for USB On-The-Go and Embedded Host Supplement Revision 2.0 Version 1.0.

 Can you please guide me about, how the Embedded host compliance test is performed?
 Is there any Test suite which I can run InHouse?

Regards,
Nitin


Pat Crowe

  • Member
  • ***
  • Posts: 39
Re: Embedded host compliance test
« Reply #1 on: March 20, 2013, 09:33:08 am »
From: http://www.usb.org/developers/onthego/

Compliance testing for products conforming to Revision 2.0 of the USB On-The-Go and Embedded Host Supplement to the USB 2.0 Specification is available now. Compliance testing for SuperSpeed USB OTG products is currently under development. Manufacturers wishing to test their products for compliance should complete the compliance checklist and pass the tests as defined in the USB OTG and Embedded Host compliance plan. An automated tester, the Protocol and Electrical Tester (PET) is required in order to complete this testing.

There is a link to the PET in that paragraph on the original page.

Hope this helps.

nvd

  • Member
  • ***
  • Posts: 42
Re: Embedded host compliance test
« Reply #2 on: March 21, 2013, 12:53:52 am »
Thanks Pat!