Author Topic: ATMEL89c52 Power Down Mode  (Read 25131 times)

thothefali

  • Member
  • ***
  • Posts: 3
ATMEL89c52 Power Down Mode
« on: November 09, 2011, 08:46:36 pm »
How long does it take to wake the ATMEL 89c52 from power down mode by an external interrupt???

Jan Axelson

  • Administrator
  • Frequent Contributor
  • *****
  • Posts: 3033
    • Lakeview Research
Re: ATMEL89c52 Power Down Mode
« Reply #1 on: November 09, 2011, 09:19:22 pm »
Did you look for this information in the chip's data sheet?

Jan

thothefali

  • Member
  • ***
  • Posts: 3
Re: ATMEL89c52 Power Down Mode
« Reply #2 on: November 09, 2011, 09:33:42 pm »
 the data sheet  just says that  must do a hardware reset to exit from the power down mode. without mention for the time that needed to exit from the power down mode

Jan Axelson

  • Administrator
  • Frequent Contributor
  • *****
  • Posts: 3033
    • Lakeview Research
Re: ATMEL89c52 Power Down Mode
« Reply #3 on: November 09, 2011, 09:55:31 pm »
The data sheet says:

The reset should not be activated before VCC
is restored to its normal operating level and must be held
active long enough to allow the oscillator to restart and
stabilize.

How long this takes would vary with your supply and oscillator.

Jan