« previous next »
Pages: [1]

Author Topic: isochronous transfer in device-winusb_lvr and winusb_cs_31  (Read 4916 times)

greglapt

  • Member
  • ***
  • Posts: 2
isochronous transfer in device-winusb_lvr and winusb_cs_31
« on: January 29, 2021, 04:39:55 pm »
Hello Jan.

Thanks for your book and work.

At the latest winusb_cs_31 there is the isochronous transfer test, but in the firmware source code (device-winusb_lvr.zip) I did not found any isochronous endpoints in the device descriptors and any code for isochronous transfers. What shuld I use for test isochronous transfer via WinUSB?
Logged

Jan Axelson

  • Administrator
  • Frequent Contributor
  • *****
  • Posts: 3033
    • Lakeview Research
Re: isochronous transfer in device-winusb_lvr and winusb_cs_31
« Reply #1 on: January 29, 2021, 08:59:15 pm »
Logged

greglapt

  • Member
  • ***
  • Posts: 2
Re: isochronous transfer in device-winusb_lvr and winusb_cs_31
« Reply #2 on: January 31, 2021, 05:44:21 am »
The above example uses 3 endpoints for bulk transfers and unfortunately none isochronous. Is there an example of a configuration descriptor for WinUSB device uses isochronous  endpoints for your .net app (winusb_cs_31)?
Logged

Jan Axelson

  • Administrator
  • Frequent Contributor
  • *****
  • Posts: 3033
    • Lakeview Research
Re: isochronous transfer in device-winusb_lvr and winusb_cs_31
« Reply #3 on: February 01, 2021, 09:11:55 pm »
Logged
Pages: [1]
« previous next »