« previous next »
Pages: [1]

Author Topic: USB binterval  (Read 14009 times)

danwaqar

  • Member
  • ***
  • Posts: 16
USB binterval
« on: October 26, 2022, 02:02:50 pm »
In my composite USB device (HID+Audio)
I am seeing that setting the speaker (OUT) endpoint bInterval to 1 on USB 2.0 Speed and USB Audio 1.1 spec
The device works fine on Linux but on Windows no streaming. Upon inspection I saw no output packets going from Windows host machine to my USB device. Why is that?
As per spec Windows should recognize the binterval 1 which is a packet every 125us.
Please guide
Logged

Jan Axelson

  • Administrator
  • Frequent Contributor
  • *****
  • Posts: 3033
    • Lakeview Research
Re: USB binterval
« Reply #1 on: October 28, 2022, 10:39:42 pm »
A protocol analyzer may help isolate the problem. Start by ensuring that the device enumerated successfully.

http://janaxelson.com/development_tools.htm#analyzers
Logged

danwaqar

  • Member
  • ***
  • Posts: 16
Re: USB binterval
« Reply #2 on: November 04, 2022, 01:16:12 pm »
from this link

https://www.freelists.org/post/wdmaudiodev/USB20-High-speed-audio-device-for-windows-XP


I found the reason . There is no issue with my device rather limitation in Win audio usb driver with binterval 1

if device is USB Audio Class 1 then the binterval 1 which utilizes HS USB to full extent will not work. The USB audio class 1 will only work at usb FS. The way out is to have USB audio Class 2.0 implemented. My question is can I just do it by modifying the descriptors?
Logged

Jan Axelson

  • Administrator
  • Frequent Contributor
  • *****
  • Posts: 3033
    • Lakeview Research
Re: USB binterval
« Reply #3 on: December 16, 2022, 05:34:37 pm »
Check to see if audio 2.0 has additional required class requests.
Logged
Pages: [1]
« previous next »