PORTS Forum
Ports and Interfaces => Parallel Port => Topic started by: buzbrown on December 20, 2010, 06:40:24 pm
-
My parallel port quit working on my XP laptop. I reformatted the disk & reinstalled windows & it still doesn't work. I downloaded your "Parrallel" utility & it tells me it can't find a parallel port. When I look in windows device manager it says it's there and has no problems. How can I fix this?
-
If you have tried using multiple peripherals that used to work and no longer do, it's possible that the port is fried. I don't think Device Manager can if the output drivers are working.
Jan
-
Often the BIOS controls ports like this.
Have you booted into your BIOS setup and looked for options?
(There is often a message on the screen for how to do this as you boot. Make sure it is a "cold" boot. What is it--"Press Delete for setup", maybe, or "F6," or something.)
Mike
-
If you have tried a number of peripherals that are used for work and is not used,it is possible that the port is fried.I do not think the Device Manager,if the output drivers will work.But I can assure you that I'm going to definitely solve your problem someone....