PORTS Forum

Ports and Interfaces => Parallel Port => Topic started by: alberich on February 06, 2014, 04:19:46 am

Title: Creating a port dedicated to InpOut32 ?
Post by: alberich on February 06, 2014, 04:19:46 am

Hello everybody.

I want to "hide" a parallel port (on a PCI card) in the device manager, after installing it with the proper driver and reading "manually" its address, so it could further only be acessed via InpOut32, but it would not be seen by Windows (2000/XP) and could not be accessed as a standard port via the parallel driver in Win. Please don't ask why I want to do this ....

Is it possible ? Thanks for every (even negative) answer ; disabling the port in the device manager unfortunately disables the access via InpOut32 too ....

Title: Re: Creating a port dedicated to InpOut32 ?
Post by: Jan Axelson on February 06, 2014, 11:54:06 am

For what it's worth, I don't know of any way to do this.

Title: Re: Creating a port dedicated to InpOut32 ?
Post by: alberich on February 06, 2014, 04:19:30 pm

I thought that this "trick" could avoid any "interference" by other processes running under Windows, which would try to take some control over the port ... but if it's not possible ... For example, I will at least perform the "DisableWarmPoll" explained in the Parallel Port section.
Thanks for the answer.