PORTS Forum
Ports and Interfaces => USB => Topic started by: Nik on October 22, 2014, 06:39:05 pm
-
Hi,
As a USB MSD Host, I am trying to communicated to a MSD, but it is failing in the initial SETUP stage. The device simply does not respond (neither ACK nor NAK) to the requests.
Any clue ?
Thank you for your time.
Nitin
-
Got it.
The device either responds with ACK or does not respond at all.
Need to check what else is missing.
-
Issue closed !
The hardware analyzer was pulling the data lines up(not expected from an analyzer !) causing the SE1 condition.
Thanks!
Nitin
-
Glad you got it solved!